Product documentation/50L Recirculating Heater - USALab

50L Recirculating Heater - USALab

50L Recirculating Heater - USALab

Documents for 50L Recirculating Heater - USALab: a spec sheet. Last updated Oct 26, 2026.

Documents

About this product

Built for high flow rates at temperatures of up to 200°C, the RH-50L heats a 50L reservoir from 70°C to 200°C with +/- 0.2°C accuracy. A 7000W heater and a pump delivering 18.3L/Min with water and 6m of total lift circulate silicone oil through 3/4" MNPT connections.

  • 70 to 200 °CTemperature range
  • 7000 WHeating power
  • 18.3 L/minPump flow with water
  • 50 LReservoir capacity
  • High-temperature range. 70°C to 200°C with +/- 0.2°C accuracy.
  • Powerful heating. 7000W heater for a 50L reservoir.
  • High flow circulation. 18.3L/Min with water and 6m total pump lift.
  • Ready to connect. 3/4" MNPT ports with two 6ft insulated tubing lines included.
  • Hardwired power. 220-240V 50-60Hz 40A single phase, must be hard wired.

Applications: High flow heating, High-temperature circulation u

Specifications

Temperature Control
Temperature range70°C to 200°C
Temperature accuracy+/- 0.2°C
Recommended fluidSilicone oil only
Operation
Duty cycleNot intended for 24-hour operation; maximum operation time is 16 hours
ApplicationHigh flow rates at temperatures of up to 200°C
Included
RH-50L 200°C Heater1
3/4" FNPT insulated tubing, 6ft2
32A fuse1
Circulation
Pump flow with water18.3L/Min
Flow noteOil flow rate may vary
Total pump lift6m
Connection size3/4" MNPT
Electrical
Power supply220-240V 50-60Hz 40A single phase
WiringMust be hard wired
Acceptable voltage219V - 253V
208V inputNot compatible with 208V power input
Heating wattage7000W / 31.81A
Fuse32A (included)
Bath and Dimensions
Reservoir capacity50L
Reservoir dimensions20" x 22" x 14"
Dimensions (web listing)20" x 23.5" x 25.5"
Dimensions (measured, L x W x H)22 x 24 x 29.25 in
Weight (web listing)108 lb
Weight (measured)108 lb

From the approved spec sheet. Download the spec sheet PDF.

Request a document

Tell us which document and model number you need and we'll send it over, usually the same business day.

Loading the form…